UYNE

UYNE-2-Flute Long-Neck Micro End Mill

Commodity Brief

For miniature slots, sidewalls and stepped floors at greater reach in carbon, alloy and prehardened steels.
The AlTiCrN-coated, two-flute design has a 30° helix. A 1×D cutting length and reduced neck extend tool-tip access while providing clearance past the upper wall.
⌀0.1–0.9 mm; 91 sizes.

Description of icons

Product Introduction

Carbon steel	Alloy steel	Pre-hardened steel	Stainless steel	Aluminum alloy	Copper	Resin	Graphite	Hard and brittle materials	Heat-resistant alloys	Workpiece Hardness
Carbon steel	Alloy steel	Pre-hardened steel	Stainless steel	Aluminum alloy	Copper	Resin	Graphite	Hard and brittle materials	Heat-resistant alloys	50HRC	55HRC	62HRC
◎	◎	◎	○		○				○		◎

Code No. UYNE	(D) Dia.	(h) Length of Cut	(h1) Effective Length	(d2) Neck Dia.	(Y) Shank Taper Angle	(d) Shank Dia.	(L) Overall Length
4-010-002	0.1	0.1	0.2	0.08	12	4	50
4-010-003	0.1	0.1	0.3	0.08	12	4	50
4-010-005	0.1	0.1	0.5	0.08	12	4	50
4-010-0075	0.1	0.1	0.75	0.08	12	4	50
4-010-01	0.1	0.1	1	0.08	12	4	50
4-015-003	0.15	0.15	0.3	0.13	12	4	50
4-015-005	0.15	0.15	0.5	0.13	12	4	50
4-015-0075	0.15	0.15	0.75	0.13	12	4	50
4-015-01	0.15	0.15	1	0.13	12	4	50
4-015-012	0.15	0.15	1.2	0.13	12	4	50
4-015-015	0.15	0.15	1.5	0.13	12	4	50
4-020-004	0.2	0.2	0.4	0.17	12	4	50
4-020-005	0.2	0.2	0.5	0.17	12	4	50
4-020-008	0.2	0.2	0.8	0.17	12	4	50
4-020-01	0.2	0.2	1	0.17	12	4	50
4-020-015	0.2	0.2	1.5	0.17	12	4	50
4-020-02	0.2	0.2	2	0.17	12	4	50
4-025-005	0.25	0.25	0.5	0.22	12	4	50
4-025-0075	0.25	0.25	0.75	0.22	12	4	50
4-025-01	0.25	0.25	1	0.22	12	4	50
4-025-0125	0.25	0.25	1.25	0.22	12	4	50
4-025-015	0.25	0.25	1.5	0.22	12	4	50
4-025-02	0.25	0.25	2	0.22	12	4	50
4-025-025	0.25	0.25	2.5	0.22	12	4	50
4-030-006	0.3	0.3	0.6	0.27	12	4	50
4-030-01	0.3	0.3	1	0.27	12	4	50
4-030-015	0.3	0.3	1.5	0.27	12	4	50
4-030-02	0.3	0.3	2	0.27	12	4	50
4-030-025	0.3	0.3	2.5	0.27	12	4	50
4-030-03	0.3	0.3	3	0.27	12	4	50
4-040-008	0.4	0.4	0.8	0.37	12	4	50
4-040-01	0.4	0.4	1	0.37	12	4	50
4-040-015	0.4	0.4	1.5	0.37	12	4	50
4-040-02	0.4	0.4	2	0.37	12	4	50
4-040-025	0.4	0.4	2.5	0.37	12	4	50
4-040-03	0.4	0.4	3	0.37	12	4	50
4-040-035	0.4	0.4	3.5	0.37	12	4	50
4-040-04	0.4	0.4	4	0.37	12	4	50
4-040-05	0.4	0.4	5	0.37	12	4	50
4-040-06	0.4	0.4	6	0.37	12	4	50
4-040-07	0.4	0.4	7	0.37	12	4	50
4-040-08	0.4	0.4	8	0.37	12	4	50
4-050-01	0.5	0.5	1	0.47	12	4	50
4-050-015	0.5	0.5	1.5	0.47	12	4	50
4-050-02	0.5	0.5	2	0.47	12	4	50
4-050-025	0.5	0.5	2.5	0.47	12	4	50
4-050-03	0.5	0.5	3	0.47	12	4	50
4-050-035	0.5	0.5	3.5	0.47	12	4	50
4-050-04	0.5	0.5	4	0.47	12	4	50
4-050-05	0.5	0.5	5	0.47	12	4	50
4-050-06	0.5	0.5	6	0.47	12	4	50
4-050-08	0.5	0.5	8	0.47	12	4	50
4-050-10	0.5	0.5	10	0.47	12	4	50
4-060-012	0.6	0.6	1.2	0.56	12	4	50
4-060-015	0.6	0.6	1.5	0.56	12	4	50
4-060-02	0.6	0.6	2	0.56	12	4	50
4-060-025	0.6	0.6	2.5	0.56	12	4	50
4-060-03	0.6	0.6	3	0.56	12	4	50
4-060-04	0.6	0.6	4	0.56	12	4	50
4-060-05	0.6	0.6	5	0.56	12	4	50
4-060-06	0.6	0.6	6	0.56	12	4	50
4-060-08	0.6	0.6	8	0.56	12	4	50
4-060-10	0.6	0.6	10	0.56	12	4	50
4-060-12	0.6	0.6	12	0.56	12	4	50
4-070-02	0.7	0.7	2	0.66	12	4	50
4-070-03	0.7	0.7	3	0.66	12	4	50
4-070-04	0.7	0.7	4	0.66	12	4	50
4-070-06	0.7	0.7	6	0.66	12	4	50
4-070-08	0.7	0.7	8	0.66	12	4	50
4-070-10	0.7	0.7	10	0.66	12	4	50
4-070-12	0.7	0.7	12	0.66	12	4	50
4-070-14	0.7	0.7	14	0.66	12	4	50
4-080-016	0.8	0.8	1.6	0.75	12	4	50
4-080-02	0.8	0.8	2	0.75	12	4	50
4-080-03	0.8	0.8	3	0.75	12	4	50
4-080-04	0.8	0.8	4	0.75	12	4	50
4-080-06	0.8	0.8	6	0.75	12	4	50
4-080-08	0.8	0.8	8	0.75	12	4	50
4-080-10	0.8	0.8	10	0.75	12	4	50
4-080-12	0.8	0.8	12	0.75	12	4	50
4-080-14	0.8	0.8	14	0.75	12	4	50
4-080-16	0.8	0.8	16	0.75	12	4	50
4-090-02	0.9	0.9	2	0.85	12	4	50
4-090-03	0.9	0.9	3	0.85	12	4	50
4-090-04	0.9	0.9	4	0.85	12	4	50
4-090-06	0.9	0.9	6	0.85	12	4	50
4-090-08	0.9	0.9	8	0.85	12	4	50
4-090-10	0.9	0.9	10	0.85	12	4	50
4-090-12	0.9	0.9	12	0.85	12	4	50
4-090-14	0.9	0.9	14	0.85	12	4	50
4-090-16	0.9	0.9	16	0.85	12	4	50