KOF

Commodity Brief

External Groove Milling Cutter

◼ It is possible to directly machine T-slots and transverse slots along the contour line.

◼ It can execute deburring at the rear end or chamfering on the workpiece's bottom surface.

◼ It has excellent load capacity, rigidity and stability, and can reduce interference such as resonance.

◼ High-quality coating can enhance wear resistance, reduce the number of tool changes and extend tool life.

Description of icons

Product Introduction

Carbon Steel	Alloy Steel	Prehardened Steel	Stainless Steel	Aluminum Alloy	Copper	Resin	Graphite	Hard Brittle Material	Heat Resistant Alloy	Hardened Steel
Carbon Steel	Alloy Steel	Prehardened Steel	Stainless Steel	Aluminum Alloy	Copper	Resin	Graphite	Hard Brittle Material	Heat Resistant Alloy	〜 40HRC	〜 50HRC
○	○	○	○	◎	◎	◎				◎	○

Code No. KOF	(R) Radius	(D) Dia.	(h) Length of Cut	(h1) Effective Length	(d2) Neck Dia.	(t) No. of Flute	(d) Shank Dia.	(L) Overall Length
4-040-03	0.3R	4	0.6	8	2	4	4	50
4-040-05	0.5R	4	1	8	2	4	4	50
4-040-075	0.75R	4	1.5	8	2	4	4	50
4-040-10	1R	4	2	8	1.8	4	4	50

6-050-03	0.3R	5	0.6	10	2.5	4	6	50
6-050-05	0.5R	5	1	10	2.5	4	6	50
6-050-075	0.75R	5	1.5	10	2.5	4	6	50
6-050-10	1R	5	2	10	2.5	4	6	50

6-060-03	0.3R	6	0.6	12	3	4	6	50
6-060-05	0.5R	6	1	12	3	4	6	50
6-060-075	0.75R	6	1.5	12	3	4	6	50
6-060-10	1R	6	2	12	3	4	6	50

8-080-03	0.3R	8	0.6	16	4	6	8	60
8-080-05	0.5R	8	1	16	4	6	8	60
8-080-075	0.75R	8	1.5	16	4	6	8	60
8-080-10	1R	8	2	16	4	6	8	60

10-100-03	0.3R	10	0.6	20	5	6	10	75
10-100-05	0.5R	10	1	20	5	6	10	75
10-100-075	0.75R	10	1.5	20	5	6	10	75
10-100-10	1R	10	2	20	5	6	10	75
10-100-15	1.5R	10	3	20	5	6	10	75
10-100-20	2R	10	4	20	5	6	10	75

12-120-03	0.3R	12	0.6	24	6	6	12	75
12-120-05	0.5R	12	1	24	6	6	12	75
12-120-075	0.75R	12	1.5	24	6	6	12	75
12-120-10	1R	12	2	24	6	6	12	75
12-120-15	1.5R	12	3	24	6	6	12	75
12-120-20	2R	12	4	24	6	6	12	75