商品明細
UXEM-4-Flute Long-Flute End Mill
Commodity Brief
For side milling taller walls and steps in carbon, alloy and prehardened steels where a long cutting section is needed.
The AlTiCrN-coated, four-flute design has a 35° helix and an extended flute length, providing axial cutting coverage for walls beyond the reach of a standard-length cutting section.
⌀1–16 mm; 24 sizes.
Product Introduction
| Carbon steel | Alloy steel | Pre-hardened steel | Stainless steel | Aluminum alloy | Copper | Resin | Graphite | Hard and brittle materials | Heat-resistant alloys | Workpiece Hardness |
|---|
| 50HRC | 55HRC | 62HRC |
|---|
| ◎ | ◎ | ◎ | ○ | ○ | ○ | ○ | | | | | ◎ | |
Code No.
UXEM | (D)
Dia. | (h)
Length of Cut | (Y)
Shank Taper Angle | (d)
Shank Dia. | (L)
Overall Length |
|---|
| 4-010-04 | 1 | 4 | 12 | 4 | 50 |
| 4-010-05 | 1 | 5 | 12 | 4 | 50 |
| 4-015-06 | 1.5 | 6 | 12 | 4 | 50 |
| 4-015-075 | 1.5 | 7.5 | 12 | 4 | 50 |
| 4-020-08 | 2 | 8 | 12 | 4 | 50 |
| 4-020-10 | 2 | 10 | 12 | 4 | 50 |
| 4-025-10 | 2.5 | 10 | 12 | 4 | 50 |
| 4-025-12 | 2.5 | 12 | 12 | 4 | 50 |
| 6-030-12 | 3 | 12 | 15 | 6 | 50 |
| 6-030-15 | 3 | 15 | 15 | 6 | 50 |
| 6-040-16 | 4 | 16 | 15 | 6 | 50 |
| 6-040-20 | 4 | 20 | 15 | 6 | 60 |
| 6-050-20 | 5 | 20 | 15 | 6 | 60 |
| 6-050-25 | 5 | 25 | 15 | 6 | 75 |
| 6-060-24 | 6 | 24 | - | 6 | 75 |
| 6-060-30 | 6 | 30 | - | 6 | 75 |
| 8-080-32 | 8 | 32 | - | 8 | 75 |
| 8-080-40 | 8 | 40 | - | 8 | 100 |
| 10-100-40 | 10 | 40 | - | 10 | 100 |
| 10-100-50 | 10 | 50 | - | 10 | 100 |
| 12-120-48 | 12 | 48 | - | 12 | 100 |
| 12-120-60 | 12 | 60 | - | 12 | 120 |
| 16-160-64 | 16 | 64 | - | 16 | 120 |
| 16-160-80 | 16 | 80 | - | 16 | 150 |