• UCN
UCN
Commodity Brief
Spiral Thread Cutter NPT (Internal/External)
◼ Accurate tolerance range, no need to consider the problem of tooth pitch,which makes processing more convenient.

◼ Titanium-silicon coating on the back,Excellent bending resistance and excellent cutting angle make it easy to machine difficult-to-machine ma terials.

◼ The cutting resistance is low and the chips are short,And the tool is not easy to break during processing.It can be easily removed without damaging the workpiece,which greatly reduces the processing risk.

      Product Introduction

      Carbon SteelAlloy SteelPrehardened SteelStainless SteelAluminum AlloyCopperResinGraphiteHard Brittle MaterialHeat Resistant AlloyHardened Steel

      55HRC

      65HRC

      70HRC
        
            Code No.
      UCN  
      Thread Size(P)
      Pitch 
      (D)
      Dia.
      (h)
      Length of Cut
      (t)
      No. of Flute
      (d)
      Shank Dia.
      (L)
      Overall Length
      (Zt)
      No. of Pitch
      (mm)
      Bottom hole size
      2706  1/16” x 27274.749.43660106.3
      2708  1/8” x 27276.949.44860108.5
      1810  1/4” x 18188.5614.1410751011.1
      1812  3/8” x 181811.0514.1412751014.5
      1412  1/21410.6520.8412751217.7
      1416  1/2”,3/4” x 141413.9825.44161001417.7/23.0
      115201-2” x 11.511.517.9933.14201001529.0/56.0
      0820  2 1/2”,3” x 8817.638.14201001266.5
      Description of icons
      1
      Helix Angle
      • Left 11°
      • Left 20°
      • 12°
      • 20°
      • 25°
      • 30°
      • 35°
      • 35°/38°
      • 37°
      • 40°
      • 40°/42°
      • 45°
      • 50°
      • 15°
      • Left 15°
      2
      Applications
      • Side milling
      • Slotting
      • 3D milling
      • Face milling
      • Pluging
      • Drilling
      • Thead milling
      • C chamfering
      • R chamfering
      • Chamfer
      • Deep Side Groove
      3
      Number of FluteFlute number of end mill
      • 1-flute
      • 2-flute
      • 3-flute
      • 4-flute
      • 6-flute
      • 8-flute
      • 10-flute
      4
      Possibility for material Hardness
      • Possible to cut up to 55HRC
      • Possible to cut up to 62HRC
      • Possible to cut up to 65HRC
      • Possible to cut up to 68HRC
      • Possible to cut up to 70HRC
      • Possible to cut up to 50HRC
      5
      Corner
      • Corner edge
      • Sharp edge
      6
      Material
      • CBN
      • MG
      • PCD
      • SCD
      • SMG
      • WC
      7
      Coating
      • Arti-CO
      • nACo-Blue
      • DLC
      • DR
      • TinSin
      • Uni-Co
      • ZrN