MEB-2-Flute Ball End Mill for Hardened Steel

Recommended for finishing 3D surfaces and radii in prehardened and hardened steels, including contoured molds and parts.
TiSiN coating, two flutes and a 30° helix are combined with a 2×D length of cut. The ball-nose profile suits continuous finishing across curved surfaces and blended radii.
⌀1–12 mm; 57 sizes.

KARP-3-Flute 50° Helix Corner Radius End Mill for Aluminum

Recommended for side milling, slotting and face milling in aluminum alloys and copper; the corner radius forms a specified fillet where the wall meets the floor.
Three flutes, a 50° helix and a 3×D cutting length suit profiles and slots with taller walls. Multiple corner-radius options let the tool match the part’s fillet geometry.
⌀1–16 mm; 55 sizes.

MXE-4-Flute End Mill for Hardened Steel

For side milling, slotting and face milling in carbon, alloy and prehardened steels, as well as hardened steel at the 62 HRC level.
Four flutes, a 35° helix and TiSiN coating are paired with fractional-millimeter diameter options for slots and profiles that fall between whole-millimeter tool sizes.
⌀1–12 mm; 76 sizes.

MENB-2-Flute Long-Neck Ball End Mill for Hardened Steel

Recommended for extended-reach finishing of 3D surfaces and radii in prehardened and hardened steels, particularly contours close to adjacent walls.
The TiSiN-coated, two-flute design has a 30° helix. Its short cutting section and reduced neck provide access and wall clearance for deeper contours, with multiple effective lengths available at each diameter.
⌀1–6 mm; 129 sizes.

KOC-90°/120° Spot Drill for Aluminum

• Recommended for spot drilling and hole-entry chamfering in aluminum alloys, copper and resin.
• The DLC-coated design has two flutes and a 20° helix. Its 90° or 120° point establishes the starting location for drilling and can also produce the corresponding hole-entry angle.
• ⌀3–16 mm; 16 sizes.

UAR-3-Flute Corner Radius End Mill for Aluminum

Recommended for wall profiling, slotting and floor-to-wall fillets in aluminum alloys and copper.
The three-flute, 40°-helix design combines a flat end with radiused corners for machining floors and the fillets where they meet side walls.
⌀1–12 mm; 95 sizes.

UEBS-2-Flute Short-Shank Ball End Mill

Recommended for curved surfaces and radii in carbon, alloy and prehardened steels when a short-shank, two-flute ball end mill is preferred.
AlTiCrN-coated, with the same radius, cutting length and shank diameter as the corresponding UEB sizes. Its 45 mm overall length is 5 mm shorter for setups requiring a shorter tool.
⌀1–4 mm; 40 sizes.

KOD-Dovetail Cutter

• Recommended for dovetail slots and back chamfers beneath slot openings in aluminum alloys, copper and resin.
• The reverse-tapered, four-flute head and reduced neck provide side access beneath the opening to form dovetail faces and back-chamfer profiles. The cutter is TiSiN-coated.
• ⌀1–12 mm; 64 sizes.

MXNE-4-Flute Long-Neck End Mill for Hardened Steel

For sidewalls, narrow slots and stepped floors at greater reach in prehardened steel and hardened steel at the 62 HRC level.
The TiSiN-coated, four-flute design has a 35° helix. A 1×D cutting length and reduced neck extend tool-tip access while providing clearance past the upper wall.
⌀1–8 mm; 91 sizes.

UCMS-ISO Internal Thread Mill, 2× Thread Length

Recommended for ISO metric internal threads with shorter thread lengths in carbon, alloy and prehardened steels.
A short threaded cutting section and reduced neck leave clearance between the neck and the hole wall. The design uses a 15° helix and TiSiN coating.
⌀0.72–16 mm; 18 sizes.

UEB-2-Flute Ball End Mill

Recommended for 3D contours and radii in carbon, alloy and prehardened steels, including curved mold surfaces and part profiles.
AlTiCrN coating, two flutes and a 30° helix are combined with a 2×D length of cut. The ball-nose profile suits continuous contouring across curved surfaces and blended radii.
⌀1–12 mm; 73 sizes.

UXE-4-Flute End Mill

For side milling, slotting and face milling in carbon, alloy and prehardened steels.
Four flutes with a 35° helix and AlTiCrN coating are available in fractional-millimeter diameters for slot widths, steps and profiles that do not match whole-millimeter tool sizes.
⌀1–12 mm; 76 sizes.