Micro End Mill Taiwan Leading Manufacturer- SA-TOOLS

PRODUCTS

顯示

UPET-4-Flute Heavy-Duty End Mill, 35° Helix

For side milling, slotting and face milling of carbon, alloy and prehardened steel components.
Four flutes with a 35° helix and AlTiCrN coating combine peripheral edges for walls with square-end edges for flat floors, making this a practical choice for straight walls and stepped surfaces.
⌀3–20 mm; 13 sizes.

UYAE-2-Flute Micro End Mill for Aluminum

Recommended for micro side milling, slotting and face milling in aluminum alloy parts.
Two flutes with a 35° helix and a 2×D cutting length suit fine profiles and narrow slots, while the flute spaces provide a path for aluminum-chip evacuation.
⌀0.1–0.95 mm; 18 sizes.

UCP-NPS Internal Spiral Thread Mill

Recommended for milling NPS straight internal pipe threads in carbon, alloy and prehardened steels for components with straight-thread pipe connections.
A multi-row cutting section is configured for non-tapered internal pipe threads. The TiSiN-coated design has a 15° helix, with three or four flutes depending on size.
⌀6–12 mm; 6 sizes.

UYCE-2-Flute Micro End Mill for Plastics

Recommended for micro side milling, slotting and face milling in resin parts.
The 3×D cutting length provides an extended peripheral cutting section for fine grooves and wall profiles. Two flutes with a 30° helix leave space for chip evacuation.
⌀0.1–0.95 mm; 18 sizes.

UC55I - 55° Partial-Profile Carbide Thread Mill (Internal/External)

Recommended for milling 55° internal and external threads in carbon, alloy and prehardened steels when parts require different pitches with the same thread angle.
The partial-profile form covers different pitches within the range listed for each size. Six straight flutes, a reduced neck and TiSiN coating support helical milling of internal and external threads.
⌀4–12 mm; 5 sizes.

UC60I-60° UN Internal Thread Mill

Recommended for milling small 60° UN internal threads in carbon, alloy and prehardened steels, with UNC coarse- and UNF fine-pitch options.
A single-form head and reduced neck provide wall clearance for helical milling of the specified UNC or UNF thread. The TiSiN-coated tool has four or six straight flutes, depending on size.
⌀1.16–5.16 mm; 21 sizes.

KAEP-3-Flute End Mill for Aluminum

Recommended for side milling, slotting and face milling in aluminum alloy and copper parts.
Three flutes with a 50° helix enter the cut progressively during side milling. The flute channels provide a path for aluminum and copper chips during continuous wall-profile machining.
⌀1–20 mm; 33 sizes.

UC60M-60° ISO Internal Thread Mill

Recommended for milling small 60° ISO metric internal threads in carbon, alloy and prehardened steels.
A single-form cutting head and reduced neck provide clearance for helical milling inside small prepared holes. The TiSiN-coated cutter has four or six straight flutes, depending on size.
⌀0.72–4.72 mm; 12 sizes.

KAEPMS-Short-Shank 3-Flute Long-Flute End Mill for Aluminum

Recommended for side milling, slotting and face milling in aluminum alloys and copper.
The short-shank design combines three flutes, a 50° helix and a long cutting section for contour milling along taller walls.
⌀1–4 mm; 23 sizes.

UC60Q-60° Multi-Range Thread Mill

Recommended for milling 60° internal and external threads in carbon, alloy and prehardened steels when a component requires several pitches with the same thread angle.
The single-form cutting profile accommodates the pitches listed for each size. A reduced neck provides clearance inside bores or near external-thread shoulders; the cutter has a 15° right-hand helix and TiSiN coating.
⌀1.95–16 mm; 10 sizes.

KAEPM-3-Flute Long-Flute End Mill for Aluminum

Recommended for side milling taller walls in aluminum alloy and copper parts.
The long-flute design combines three flutes and a 50° helix. Versions with a 4×D or 5×D cutting length extend the peripheral cutting section along taller walls.
⌀1–20 mm; 27 sizes.

UCFQ-ISO Special-Size Internal Thread Mill

Recommended for milling special-size ISO internal threads in carbon, alloy and prehardened steels.
The TiSiN-coated, 15°-helix design uses three or four flutes, depending on size. Each item combines a specified pitch and cutting length for helical thread milling in a pre-drilled hole.
⌀4–20 mm; 42 sizes.

Page：資料總數：75