Micro End Mill Taiwan Leading Manufacturer- SA-TOOLS

PRODUCTS

顯示

UYB-2-Flute Micro Ball End Mill

Recommended for fine contours and radii in carbon, alloy and prehardened steels, particularly small features on miniature parts.
The two-flute, 30°-helix design combines AlTiCrN coating with a 2×D length of cut. Its ball-nose profile suits continuous curved surfaces and small blended internal radii.
⌀0.1–0.9 mm; 10 sizes.

MXNR-4-Flute Long-Neck Radius End Mill for Hardened Steel

Recommended for finishing wall profiles and floor-to-wall fillets in recessed areas of prehardened and hardened steel parts.
The TiSiN-coated, four-flute design uses a 35° helix, a short cutting section and a reduced neck, combining localized cutting at the tip with clearance from adjacent walls.
⌀0.2–6 mm; 458 sizes.

UYESS-2-Flute Short-Shank Micro End Mill

For micro side milling, slotting and flat-surface machining in aluminum alloys and copper, as well as detailed profiles in resin and graphite.
Two flutes with a 30° helix and ta-C coating combine a 3×D cutting length with a compact 38 mm overall length for miniature parts requiring cutting coverage along taller fine-scale walls.
⌀0.1–0.99 mm; 90 sizes.

UYES-2-Flute Short-Shank Micro End Mill

A short-shank, two-flute option for micro-slotting, side milling and flat-surface machining in carbon, alloy and prehardened steels.
The 45 mm overall length retains UYE’s 2×D cutting length, 30° helix and AlTiCrN coating for compact micro-machining setups with limited tool-length space.
⌀0.1–0.95 mm; 18 sizes.

UYNB-2-Flute Long-Neck Micro Ball End Mill

Recommended for fine 3D contours in carbon, alloy and prehardened steels, including small features at greater reach or near adjacent walls.
The two-flute, 30°-helix design uses AlTiCrN coating. A short cutting section and reduced neck combine cutting reach with wall clearance, with multiple effective-length options at each diameter.
⌀0.1–0.9 mm; 86 sizes.

UXR-4-Flute Corner Radius End Mill

Recommended for wall profiling, slotting and floor-to-wall fillets in carbon, alloy and prehardened steels.
Four flutes, a 35° helix and AlTiCrN coating are combined with a flat end and radiused corners for floors and their filleted transitions to side walls.
⌀1–12 mm; 75 sizes.

UXNR-4-Flute Long-Neck Radius End Mill

Recommended for wall profiles and floor-to-wall fillets in recessed areas of carbon, alloy and prehardened steel parts.
The short cutting section and reduced neck provide access to localized features with side-wall clearance. The design uses four flutes, a 35° helix and AlTiCrN coating.
⌀1–6 mm; 332 sizes.

KOA-Engraving Cutter

Recommended for lettering, fine-line engraving and edge chamfering in aluminum alloys, copper and resin.
The AlTiN-coated, single-flute conical tip is offered in different angles and tip sizes to suit fine lettering, engraved-line openings and chamfer profiles.
⌀0.05–1.5 mm; 70 sizes.

UYE-2-Flute Micro Square End Mill

For micro-slotting, side milling and flat-surface machining in carbon, alloy and prehardened steels.
Two flutes with a 30° helix and AlTiCrN coating provide a 2×D cutting length. The square-end geometry machines miniature slot walls and flat floors in small steps and detailed profiles.
⌀0.1–0.95 mm; 18 sizes.

MEBS-2-Flute Short-Shank Ball End Mill

Recommended for finishing curved surfaces and radii in prehardened and hardened steels when a short-shank, two-flute ball end mill is preferred.
TiSiN-coated, with the same radius, cutting length and shank diameter as the corresponding MEB sizes. Its 45 mm overall length is 5 mm shorter for setups requiring a shorter tool.
⌀1–4 mm; 40 sizes.

UYNE-2-Flute Long-Neck Micro End Mill

For miniature slots, sidewalls and stepped floors at greater reach in carbon, alloy and prehardened steels.
The AlTiCrN-coated, two-flute design has a 30° helix. A 1×D cutting length and reduced neck extend tool-tip access while providing clearance past the upper wall.
⌀0.1–0.9 mm; 91 sizes.

KOB-260° Ball Nose End Mill

Recommended for 3D profiling, side-facing curves and radius finishing in aluminum alloys, copper and resin.
The 260° spherical cutting edge extends behind the ball's equator. Combined with a reduced neck, it suits profiles approached from the side; the tool has two flutes and an AlTiN coating.
⌀1–16 mm; 13 sizes.

Page：資料總數：75