MYE

2-Flute Micro End Mill for Hardened Stell

# Very fine tool for high speed machining.
# High-hardness and high-speed cutting can directly perform rough machining to fine machining on heat-treated molds.
# Excellent wear resistance, smooth chip removal, not easy to break, prolong tool life.

MYNE

2-Flute Long Neck Micro End Mill for Hardened Stell

# Very fine tool for high speed machining.
# Excellent wear resistance, smooth chip removal, not easy to break, prolong tool life.
# Good chip evacuation for deep holes and deep grooves, enabling high-efficiency machining.
# Small diameter milling cutters can meet the application needs of different machining depths.

KOA

Engraving Cutters
#High-capacity chip flute makes the tool not stick to chips during high-speed cutting, with low heat generation and high finish.
#The tool is sharp, the processing effect and processing efficiency are excellent, and it can process various high-precision shape molds.
#Suitable for processing general steel, aluminum alloy, brass, plastic, wood, medium processing and fine processing.

MYES

Short Blank 2-Flute Micro End Mill for Hardened Stell

# Very fine tool for high speed machining.
# High-hardness and high-speed cutting can directly perform rough machining to fine machining on heat-treated molds.
# Excellent wear resistance, smooth chip removal, not easy to break, prolong tool life.

KOB

2-Flute 260˚ Ballnose End Mill
# Excellent cutting forces lead to better stability and lower power consumption.
# High feed provides higher productivity.

KOC

Spot Drills 90˚/120˚
# Nearly 2um runout in the center can get high stability when Positioning, 
  and then improve the life of the drill bit.
# Positioning and chamfering can be completed at one tool.
# Use AlTiCrN coating to prolong tool life.

UYE

2-Flute Micro End Mill

# Finely ground to precise specifications.
# Smooth cutting, no sticking to the tool, and high-efficiency machining.
# Superior coating through higher abrasion resistance. 

KOD

Tail Slot Cutters 45˚/60˚
#
#
#

KTXE

4-Flute Tapered End Mill
# Directly process heat treatment molds from rough 
  machining to fine machining to reduce tool change.
# Suitable for high-speed and various mold parting 
  Meticulous cutting edge.
# Excellent wear resistance, smooth chip removal, 
  increased concentration, prolong tool life.

UYNE

2-Flute Long Neck Micro End Mill

# Long-necked tools for narrow and deep machining.
# Ultra-wide capacity row cutting is smoother, workpiece precision is more glossy.
# It can perform rough machining to fine machining of heat-treated molds, reducing the number of tool changes and saving mold making time.

UYES

Short Blank 2-Flute Micro End Mill

# Finely ground to precise specifications.
# Smooth cutting, no sticking to the tool, and high-efficiency machining.
# Superior coating through higher abrasion resistance.

KOE

Chamfer Cutters 
# 
# 
# 

UCI

Spiral Thread Cutter 
UN American Standard (Internal)
# Accurate tolerance range, no need to consider the problem of tooth pitch, 
  which makes processing more convenient.
# Titanium-silicon coating on the back, 
  Excellent bending resistance and excellent cutting angle make it easy to machine difficult-to-machine ma terials.
# The cutting resistance is low and the chips are short, 
  And the tool is not easy to break during processing. It can be easily removed without damaging the workpiece, which greatly reduces the processing risk.

KOR

2-Flute Inner Radius Cutter
# 1/4R design,Suitable for machining center.
# Sharp edges make it easy to machine thin workpieces.

MXE

4-Flute End Mill for Hardened Stell

# It is specially designed for the processing of workpieces below HRC65. It is specially designed for ultra-high speed and high efficiency.
# The surface of the cutting edge is smooth, the chip removal is smooth, the tool life is long, and the precision is also improved.
# Excellent coating, high temperature resistance, abrasion resistance and longer life.

MXNE

4-Flute Long Neck End Mill for Hardened Stell

# It is specially designed for the processing of workpieces below HRC65. It is specially designed for ultra-high speed and high efficiency.
# Small diameter milling cutters can meet the application needs of different machining depths.
# Excellent coating, high temperature resistance, abrasion resistance and longer life.

UCIS

Spiral Thread Cutter with Three Thread 
UN American standard(internal) 
# 2 times the effective length.
# Accurate tolerance range, no need to consider the problem of tooth pitch, 
  which makes processing more convenient. 
# Titanium-silicon coating on the back, 
  Excellent bending resistance and excellent cutting angle make it easy to machine difficult-to-machine materials. 
# The cutting resistance is low and the chips are short, 
  and the tool is not easy to break during processing. It can be easily removed without damaging the workpiece, which greatly reduces the  
  processing risk.

KOT

6-Flute T Shape Cutters
# It can process T-slots and transverse slots on the machining surface, and can mill out T-slots with required precision at one time.
# Good rigidity, high wear resistance, high processing precision.

UCIL

Spiral Thread Cutter with Three Thread 
UN American standard(internal)
# 3 times the effective length.
# Accurate tolerance range, no need to consider the problem of tooth pitch, 
  which makes processing more convenient. 
# Titanium-silicon coating on the back, 
  excellent bending resistance and excellent cutting angle make it easy to machine difficult-to-machine materials. 
# The cutting resistance is low and the chips are short, and the tool is not easy to break during processing. It can be easily removed without damaging the workpiece, which greatly reduces the processing risk.

KOV

Dual Chamfer Cutters
#
#
#